AC charging piles are used for AC charging of electric vehicles. The charging piles are divided into two types: wall-mounted and floor-mounted. AC charging piles can be installed in residential neighborhoods, shopping malls, various surface and underground parking lots and other places where charging is required. AC charging piles can be used for charging pure electric/plug-in hybrid passenger cars and commercial vehicles.
7kWSingle phase AC charging pile | |
input&output | |
Power Supply | 1P+N+PE |
Input Voltage | 230V AC |
Input Frequency | 50Hz/60Hz |
Rated Power | 7kW |
Output Voltage | AC 230V |
Rated Output Current | AC 32A |
Number of Connector | Single |
Charging Connector | Type 2 |
Cable Length | 3m |
Standby Power | <15W |
Communication &Interface | |
Payment | RFID Card |
Networking | Ethernet/ RS485/CAN/ 4G/WiFi/Bluetooth |
LED Indicator | Green/Yellow/Red |
Emergency Stop Button | Yes |
Safety | |
Protection | Over/Under voltage Protection，Over-current Protection，Short Circuit Protection，Ground Protection，Over-Temp Protection，Lightning Protection |
RCD | 30mA type-A+6mA DC |
Ingress Protection | IP65 |
Certification | CE |
Certification Standard | EN/EC61851-1:2017, EN/EC61851-21-2-2018 |
Warranty | 2 years |
Working Environment | |
Operation Temperature | -30℃~+50℃ |
Storage Temperature | -40°C-+60°C |
Operation Altitude | <2000m |
Operation Humidity | 5%~95%HR |
Cooling Methods | Natural air cooling |
Mechanical | |
Mounting Type | Column mounted (floor mounted) or wall mounted Install optional |
Dimension | 239*151.5*96mm |
Weight | 8.5kg |